蒸压轻质砂加气混凝土板

1. 产品用途Product Application HNKJ ALC Panel can be used in the buildi...

联系电话：0572-3121528

联系客服

产品详情

1. 产品用途Product Application

HNKJ ALC Panel can be used in the building structure as external panels, floor panels and roof slabs.

蒸压轻质砂加气混凝土板主要用于新建或改扩建建筑物的内墙、外墙、楼面、屋面和保温。

1. 板材产品分类ALC Panel Product Category

Inner wall panels, exterior wall panels, floor panels, roof panels and insulation panels

按使用部位，蒸压轻质砂加气混凝土板分为内墙板、外墙板、楼板、屋面板和保温板。

板材形状图片（带槽口的）

2.1 内墙板规格和级别Specifications and grades of Interior wall panels

规格	等级	抗压强度（MPa）		平均干密度（ kg/m³）
规格	等级	平均值	最小值	平均干密度（ kg/m³）
≤3000x600x75	B05 A3.5	≥3.5	≥3.0	≤525
≤4250x600x100	B05 A3.5	≥3.5	≥3.0	≤525
≤5050x600x125	B05 A3.5	≥3.5	≥3.0	≤525
≤6000x600x150	B05 A3.5	≥3.5	≥3.0	≤525

备注：如有特殊规格，可由双方协商确定。In case of special specifications, it can be decided by both parties.

2.2 外墙板规格和级别Specifications and grades of Exterior wall panels

规格	等级	抗压强度（MPa）		平均干密度（ kg/m³）
规格	等级	平均值	最小值	平均干密度（ kg/m³）
≤3750x600x100	B05 A3.5	≥3.5	≥3.0	≤525
≤4690x600x125	B05 A3.5	≥3.5	≥3.0	≤525
≤5750x600x150	B05 A3.5	≥3.5	≥3.0	≤525
≤6000x600x175	B05 A3.5	≥3.5	≥3.0	≤525
≤6000x600x200	B05 A3.5	≥3.5	≥3.0	≤525

备注：如有特殊规格，可由双方协商确定。In case of special specifications, it can be decided by both parties.

2.3 楼板、屋面板规格和级别Specification and rating of floor and roof panels

规格	等级	抗压强度（MPa）		平均干密度（ kg/m³）
规格	等级	平均值	最小值	平均干密度（ kg/m³）
≤2100x600x100	B06 A5.0	≥5.0	≥4.0	≤625
≤2700x600x125	B06 A5.0	≥5.0	≥4.0	≤625
≤3400x600x150	B06 A5.0	≥5.0	≥4.0	≤625
≤4500x600x200	B06 A5.0	≥5.0	≥4.0	≤625
≤5700x600x250	B06 A5.0	≥5.0	≥4.0	≤625
≤6000x600x300	B06 A5.0	≥5.0	≥4.0	≤625

备注：如有特殊规格，可由双方协商确定。In case of special specifications, it can be decided by both parties.

2. 板材安装节点Panels installation part

Installation application Atlas:

安装应用图集：06CG01《蒸压轻质砂加气混凝土砌块和板材结构构造》

06CJ05《蒸压轻质砂加气混凝土砌块和板材建筑构造》

安装流程Installation process

运输至项目现场----垂直运输至楼层-----弹线放样----板材就位固定----墙与结构间缝及板间缝处理----饰面处理

主要安装节点：Main installation part:

内墙板安装节点Interior wall Panels installation part

外墙横板安装节点

3. 外墙竖板安装节点Exterior wall Panels installation part

2.4 屋面板、楼板安装节点 floor and roof Panels installation part

4. 板材应用特点：Panels application characteristics:

（1）. 板材墙体无需找平，可直接批腻子。

（2）. 板材墙体不需要设置圈梁和构造柱。

AAC can be install without set the ring beam and constructional column.

（3）. 板材墙体本身的保温隔热性能、隔声性能、抗渗性能等明显优于砌块，使用板材墙体时，传统砌块墙体厚度可适当减小，节约造价，增加使用面积。

AAC is fire and pest resistant, and is economically and environmentally superior to the more traditional structural building materials such as concrete, wood, brick and stone.

Also, it helps reduce the cost and increasing the use area.

（4）. 板材墙体的施工速度可达砌块墙体的四倍。

AAC helps the construction of four times faster than the blockwork.

（5）. 板材墙体的整体性明显优于砌块墙体。

Autoclaved Aerated Concrete (AAC) has excellent acoustic performance.

（6）. 板材墙体可避免出现墙体开裂。

AAU can avoid walling.

预制条板现场拼装，建筑装配化程度高。

prefabricated plate field assembly which helps the building assembly work better.

项目实例